- Fort Saskatchewan, AB
- Rated Excellent on Google
Driveway Sealing in Fort Saskatchewan, AB
Concrete driveway sealing for Fort Saskatchewan homes, whether the slab was poured last year or has been through many winters. We inspect it, clean it with hot water pressure washing, let it dry and apply a sealer chosen for its condition, usually in a single day.
Driveway sealing quote for Fort Saskatchewan
Give us the approximate size and condition of your driveway and we will set up a free assessment.
No obligation. We never share your information.
- 20+ Years Experience
- Licensed & Insured
- 500+ Projects
- Proudly Canadian
Trusted by
New Pour or Mature Slab: Sealing Driveways in Fort Saskatchewan
Westpark and Southfort are Fort Saskatchewan's newest neighbourhoods. If your driveway there was poured recently, seal it within its first year, before it spends a winter taking in meltwater and de-icing salt.
In mature neighbourhoods such as Bridgeview, Clover Park, Pineview and Sherridon, an older driveway may already show hairline cracks, oil, rust or tire stains, or a top layer worn down by years of snow clearing. Cracks are filled with silicone crack filler or mortar first, then the whole surface is sealed.
In both cases the goal is the same: cut down how much water, salt and oil the concrete absorbs, so freeze-thaw cycles have less to work with. Resealing about every 2 years keeps that protection in place.
- New and existing driveways
- Free assessment
- Reseal about every 2 years
20+ years of concrete coating experience
Exposed aggregate driveway
A sealer can keep the natural look of the stone or bring out its colour.
What Happens on Sealing Day in Fort Saskatchewan
The job usually takes one full day. Most of it is cleaning and drying, because moisture keeps a sealer from adhering properly.
Walk-around
We inspect the driveway, point out cracks or stains that need attention and confirm the sealer.
Clear the surface
Dirt, debris, stains and other surface contaminants are removed.
Hot water wash
Hot pressure washing lifts embedded grime, then the concrete gets enough time to dry completely.
Seal
The sealer is applied evenly from edge to edge for full coverage.
Penetrating or Acrylic: Which Sealer Fits
We pick the sealer after seeing the surface, how exposed it is and the look you want. Prices are the ranges in our current pricing guide.
Penetrating sealer
About $1.00 to $1.75 per sq ft. It soaks in and protects from within while keeping the natural appearance of the concrete.
Acrylic sealer
About $0.70 to $0.85 per sq ft. It forms a protective film on the surface at a lower cost.
UV protection
Quality sealers include UV protection that helps reduce discolouration over time.
Natural or enhanced
Keep the concrete looking the way it does now, or choose a finish that deepens its colour.
Driveway Sealing Near Me in Fort Saskatchewan
Looking for driveway sealing near you in Fort Saskatchewan? The city is on our driveway sealing service list, along with Edmonton, Sherwood Park, St. Albert, Morinville and other communities in the region. Send us your address and we will book a free assessment.
Residential neighbourhoods in Fort Saskatchewan:
- Westpark
- Southfort
- Sherridon
- Pineview
- Clover Park
- Bridgeview
Our Services in Fort Saskatchewan
Driveway sealing in Fort Saskatchewan
Inspection, hot pressure washing and a penetrating or acrylic sealer.
Epoxy flooring in Fort Saskatchewan
Seamless coatings for the garage at the top of the driveway, plus basements and shops.
Concrete polishing in Fort Saskatchewan
Diamond-ground floors for commercial and industrial buildings.
Damaged joints in a slab? See control joint filling. For concrete balconies, see balcony coatings.
Reviews From Sealing and Coating Clients
Driveway Sealing in Fort Saskatchewan: FAQ
Timing, weather, curing and cracks: what to know before you book.
When in the year can a driveway be sealed?
In warm, dry weather, typically from late spring through early fall (May to early October). The concrete has to be completely dry, the temperature above 10 °C, and no rain expected for 24 to 48 hours.
How often should I reseal?
About every 2 years in this climate, adjusted for traffic, exposure and the sealer used. If the surface starts absorbing water quickly, it is time.
When can I park on it again?
Give it 1 to 2 hours before walking on it and 3 to 6 hours before driving on it. Full curing can take up to 24 hours, so keep heavy vehicles and sharp objects off it until then.
Does a sealer repair cracks?
No. It protects against new damage but cannot repair existing cracks, structural or hairline. Significant cracks are treated with silicone crack filler or mortar before the sealer goes on.
Why not put epoxy on my driveway instead?
Coatings like epoxy sit on top of the concrete as a thicker layer and suit enclosed spaces like garages. Sealers penetrate the concrete and are the better match for a driveway exposed to weather.
Boundaries © OpenStreetMap contributors
Driveway Sealing in Nearby Communities
Distances are straight-line from central Fort Saskatchewan.
- Driveway sealing in Sherwood Park20 km south
- Bruderheim21 km northeast
- Driveway sealing in Edmonton26 km southwest
- Driveway sealing in St. Albert29 km west
- Morinville30 km west
Also on our service list
- Beaumont
- Leduc
- Spruce Grove
- Stony Plain
Not sure we reach your street? Call (825) 474-1717.
Plan Your Fort Saskatchewan Driveway Sealing
We seal from late spring to early fall. Send your details for a free assessment and a sealer recommendation.
Monday to Saturday, 9 am to 5 pm
info@sealtechconcrete.com