Concrete driveway sealing for Sherwood Park homes. We hot pressure wash the slab, let it dry and apply a sealer chosen for your driveway, so water, road salt and oil have a harder time getting in. Most driveways are done in one day.
Get a free driveway sealing quote in Sherwood Park
Send us the size and condition of your driveway. Office hours are Monday to Saturday, 9 am to 5 pm.
No obligation. We never share your information.
Trusted by






Water gets into unsealed concrete, freezes and expands. Repeat that through a Sherwood Park winter and small pores turn into cracks that keep growing. Road salt and de-icing chemicals tracked in from the street soak into the surface and speed it up.
Snow clearing wears down the top layer, and oil, rust and tire marks leave stains that bare concrete holds on to. A sealer reduces how much water, salt and oil the concrete absorbs, which is why resealing about every 2 years makes sense here.
If your driveway was poured recently, seal it within its first year so it goes into its first winters already protected.

20+ years of concrete coating experience
Cleaned with hot pressure washing, dried, then sealed against moisture and salt.
Sealing only works on clean, dry concrete. Every driveway goes through the same three steps, usually in one day.
We check the slab for cracks and stains and remove dirt, debris and surface contaminants.
Hot water pressure washing lifts grime and oil, then the concrete gets time to dry completely.
We apply the sealer evenly across the whole driveway for full coverage.

A sealer will not repair a driveway, but it slows down the damage that shortens its life.
Reduces moisture absorption, so freeze-thaw cycles do less damage.
Helps protect against oil, salt and chemical stains, and makes cleaning easier.
Quality sealers include UV protection to reduce discoloration.
Keep the natural look of the concrete or choose a finish that enhances it.
Looking for driveway sealing near you in Sherwood Park? Book a free quote and we will assess the condition of your driveway before recommending a sealer.
Sherwood Park neighbourhoods include:

Hot pressure washing and sealers for concrete driveways.
Epoxy and polyaspartic coatings for garages, basements and shops.
Diamond grinding and polishing for homes and commercial floors.
Related services: hot pressure washing for patios and walkways, and control joint filling for cracked joints.
Rated "Excellent" based on 16 Google reviews
"We have used Seal Tech to seal and maintain our driveway for several years. Always do a great job with fair pricing. Always receive many compliments from passers-by."Sherri HarrodGoogle review
"Excellent, prompt, efficient and effective work. This is the second season we have used SealTech and they were as good this season as in the past. Fair pricing is much appreciated."David MeurerGoogle review
"Hired Seal Tech and I'll say they did a very good job and were extremely attentive with their clients, highly recommended!"Rick AsterGoogle review
"Very professional company. They go above and beyond to make sure you are fully aware of the services you are getting and what to expect. Workers are very professional, show up on time and clean up after themselves."Blake AGoogle review
"Excellent service; professional and affordable. Thank you!"La LaGoogle review
"Quick and professional. Good job guys!"Dynacore MedicalGoogle review
Cost, timing and what sealing can and cannot do for a Sherwood Park driveway.
Not sure your driveway needs it?
Call us and describe it. Office hours are Monday to Saturday, 9 am to 5 pm.
(825) 474-1717Get a free quoteSealer pricing runs about $0.70 to $0.85 per square foot for an acrylic sealer and about $1.00 to $1.75 per square foot for a penetrating sealer. The total depends on the size and condition of your driveway, which we check before quoting.
About every 2 years. Traffic, weather exposure and the type of sealer change that, so if water soaks in quickly instead of sitting on the surface, it is time to reseal.
Late spring to early fall, roughly May to early October. The concrete has to be fully dry, temperatures should be above 10 °C, and there should be no rain in the forecast for 24 to 48 hours.
Stay off it for 1 to 2 hours on foot and 3 to 6 hours with a car. The sealer takes up to 24 hours to fully cure, so avoid parking heavy vehicles on it during that time.
No. A sealer protects against new damage but does not repair existing cracks. Cracks should be filled first with a silicone crack filler or mortar, then sealed. We point out which ones need attention when we assess the driveway.
Boundaries © OpenStreetMap contributors
STC Coatings seals driveways across the Edmonton region. Distances are straight-line from central Sherwood Park.
Outside these areas? Call (825) 474-1717 to ask about your location.
Tell us about your driveway and we will recommend the right sealer and timing for it.
Monday to Saturday, 9 am to 5 pm
info@sealtechconcrete.com