Epoxy Flooring in Sherwood Park, AB

A standard 2-car garage with a flake epoxy floor usually costs about $2,800 to $5,200 in Sherwood Park. Per square foot, solid-colour epoxy runs about $5 to $9, flake systems $6 to $9, polyaspartic $6 to $10, quartz $8 to $12 and metallic finishes $9 to $14. The final price depends on cracks, moisture and old coatings, so we confirm it in writing after a free on-site visit.

For most Sherwood Park garages, the best answer is both: an epoxy basecoat with flakes, sealed with a polyaspartic topcoat. The epoxy bonds deep into the ground concrete, and the polyaspartic topcoat adds UV stability and stands up better to salt, slush and hot tires than epoxy alone.

Most garages are finished in 2 to 3 days. You can usually walk on the floor about 24 hours after the topcoat goes down and park on it after about 72 hours, depending on temperature.

Yes, we install year-round. The garage needs to stay at about 10 °C during the install and cure, so we check the slab temperature and moisture first and bring heat if needed. Winter is also when our schedule has the most openings.

No. Salt brine wipes off the polyaspartic topcoat, and hot-tire peeling is a problem with DIY kits and paint, not with a floor that has been diamond-ground and professionally coated. Peeling almost always comes from poor prep, which is why we grind every slab.

Not with the right finish. Flakes add texture, and for Sherwood Park garages we recommend adding an anti-slip aggregate to the topcoat, because snowmelt pools on the floor every winter.

A properly prepared epoxy and polyaspartic floor lasts 15 to 20 years or longer in a residential garage. Our installs are backed by a 10-year warranty.

No. Estimates are free anywhere in Sherwood Park and the rest of Strathcona County, including Ardrossan, Josephburg and South Cooking Lake. We measure the floor, check the concrete and give you a written quote.