Protect the concrete driveway at your Spruce Grove home from moisture, road salt, oil and UV. We clean it with hot pressure washing, give it time to dry and apply a sealer matched to its condition, usually in one full day.
Book a free driveway assessment in Spruce Grove
Give us a rough size and tell us about any cracks or stains. We reply Monday to Saturday, 9 am to 5 pm.
No obligation. We never share your information.
Trusted by






Sealer needs warm, dry weather to bond and cure. Around Edmonton that window usually runs from late spring to early fall, roughly May to early October, and the day itself needs fully dry concrete, temperatures above 10 °C and no rain expected for 24 to 48 hours.
The rest of the year is what the sealer is there for. Water that gets into unprotected concrete freezes and expands, while de-icing chemicals, tire marks and oil drips stain the surface. A sealed driveway absorbs less of all of it.
If your driveway was poured in the last year, it should be sealed within that first year. After that, plan on resealing about every 2 years, or sooner if water soaks in quickly instead of sitting on the surface.

20+ years of concrete coating experience
A sealer can keep concrete looking natural or give it an enhanced finish.
The job usually fits into 1 full day, including washing, drying and sealing. Here is what happens.
We look at the cracks, stains and wear and give you an honest read on what sealing can and cannot do.
A sealer will not close existing cracks, so those get silicone crack filler or mortar before anything else.
Hot water cleaning lifts dirt, debris and surface contaminants, then the concrete is left to dry properly.
The sealer goes on evenly over the whole surface for full coverage.
Stay off it for 1 to 2 hours on foot and 3 to 6 hours with a car. Full cure takes up to 24 hours.

The right sealer depends on the condition of the concrete, how exposed it is and the finish you want. Current pricing per square foot:
Forms a protective layer on the surface at a lower cost per square foot.
Soaks in and protects the concrete from within while keeping its natural appearance.
Quality sealers help reduce discoloration from sun exposure.
Keep the plain concrete look or pick a finish that brings out its colour.
Need driveway sealing near you in Spruce Grove? Spruce Grove is on our list of driveway sealing service areas, along with neighbouring Stony Plain. Book a free assessment and we will recommend a sealer and a good time to apply it.
Neighbourhoods in Spruce Grove include:

Washing, drying and sealing for new and older concrete driveways.
Garage and basement coatings in flake, solid colour, quartz or metallic.
Ground and polished concrete for commercial, industrial and residential floors.
Cracked joints in a slab? See control joint filling. For the floor inside the garage, see garage floor coatings.
Rated "Excellent" based on 16 Google reviews
"We have used Seal Tech to seal and maintain our driveway for several years. Always do a great job with fair pricing. Always receive many compliments from passers-by."Sherri HarrodGoogle review
"Great professional service team. Very proficient with the quote and timelines. 100% reliable."Ken PowerGoogle review
"These guys are awesome, my garage turned out great, couldn't have imagined it would look this good! Thanks fellas."Tony MatelunaGoogle review
"Very experienced and high quality. Absolutely love the new garage floor!"Mike GGoogle review
"I'm happy with the job done, professional and on time. Good quality, recommended."Emad MikhaielGoogle review
"Hired Seal Tech and I'll say they did a very good job and were extremely attentive with their clients, highly recommended!"Rick AsterGoogle review
Timing, cost, cracks and curing for driveways in Spruce Grove.
Wondering if it is time to reseal?
Describe your driveway on the phone, Monday to Saturday, 9 am to 5 pm.
(825) 474-1717Get a free quoteFrom late spring to early fall, roughly May to early October. We need fully dry concrete, temperatures above 10 °C and no rain in the forecast for 24 to 48 hours.
Per square foot, an acrylic sealer costs about $0.70 to $0.85 and a penetrating sealer about $1.00 to $1.75. The final price depends on the size and condition of the driveway, which we check during the free assessment.
If water soaks in quickly instead of sitting on the surface, or the concrete shows early wear or discoloration, it is time. About every 2 years is a good rule here, depending on traffic, weather exposure and the sealer used.
Not for long. New concrete should be sealed within its first year after installation, so it goes into its first winters already protected.
Yes. Sealing protects against future damage but cannot repair existing cracks, whether structural or hairline. Those are addressed first with silicone crack filler or mortar, and then the sealer goes on.
Wait 1 to 2 hours before walking on it and 3 to 6 hours before driving on it. Full curing takes up to 24 hours, so keep heavy vehicles and sharp objects off it during that time.
Boundaries © OpenStreetMap contributors
We seal driveways across the Edmonton region. Distances are straight-line from central Spruce Grove.
Live somewhere else in the region? Call (825) 474-1717 and ask.
Book a free assessment and we will recommend a sealer and the right time to apply it.
Monday to Saturday, 9 am to 5 pm
info@sealtechconcrete.com